+1 (937) 890-1100 x6 phone · +1 (937) 890-5165 fax
Search by drawing # or keywords or refer to the Drawing Library
| Need Tech Help? tek(at)pavetechnologyco.com |
| Phone: 1.937.890.1100 x6 Sales Engr Fax: 1.937.890.5165 |
PAVE Technology Co was founded in 1980. Its wire and connector hermetic seals are used in a very wide range of industries for low or high pressures or vacuums requiring helium gas tight seals or IP67 to IP69 seals. PAVE products feed through a sealed bulkhead either electrical or fiber optic signals without any detectable leakage of gases or fluids. This complete leak tightness performance includes ends of any insulated, shielded or stranded copper conductor wire, cable and/or pins. Major customers include:
|
3M Applied Biosystems Applied Materials Delphi Automotive Schlumberger Eaton Corp Auto/Aero Raytheon Company Alabama Power Corp Georgia Power Corp Lockheed Martin Corp Siemens Ford Motor Company ATK Corp BAE Corp Baker Hughes Beckman Instruments Emerson Corp Boeing Company NASA Parker Corp Guidant Corp Cooper Power Systems General Electric Corp BOC Edwards Corp FEI Corp Foxboro Woodward Crane Aerospace |
Volvo, Kautex Eclipse Aviation Defense Logistics Agcy Bi-Phase Technologies Exxon Mobile Corp General Dynamics Corp General Atomic Corp United Technologies US DOE R&D Labs Harris Corp HR Textron Sciaky Inc L3 Communications Gulfstream Aerospace Magneti Marelli Gendex Mercury Marine Northrup Grumman Phillips Corp DRS Trayer Engineering Varian NOAA Petrobras NIST Thiokol Corp Robert Bosch LLC MDS Sciex |
Home
Product listing table of contents
Catalog Request
Catalog Request Form
PAVE products are used in a wide range of industries around the world including aerospace, low emission PZEV automotive and small engine (motorcycle, ATV, marine, etc) fuel pumps and transmissions, process controls, defense, telecommunications, semi-conductor and scientific instruments of all types requiring high quality seals. All our customers require high performance and cost effective standard or custom designed gas and fluid tight hermetic seals.
PAVE seals use virtually any commercial or military specification insulated wires and/or connector pins sealed in our proprietary epoxy process for a wide range of low and high pressures and vacuums, temperature ranges from -60 to 150C or 200C and from small to large quantity applications.
The wires are permanently and very strongly bonded in the epoxy seal such that the copper conductor tensile strength will almost always be exceeded causing the wire to break before it can be pulled out of the epoxy seal.
About PAVE
Tools
Site Map