E-MAIL US: tek@pavetechnologyco.com
3D CAD STP or SolidWorks models for most designs can be supplied upon request.
Catalog Request Site Map
 

  • PAVE-Mate® II

    The default 80 psi air bubble or vacuum helium leak test shown on most drawings can be increased to much higher pressures upon request for almost all designs along with leak testing with either N2 or helium. Check with PAVE sales engineering for actual maximum or desired pressure test ratings or helium leak test rates for a particular design. PAVE-Seals seal in either pressure or vacuum direction, though pressure ratings will vary by pressure direction for high pressures.

    Use your keyboard's shortcut ctrl+ F buttons to bring up your browser's find dialog box to then enter and go directly to a particular part-drawing #.

    View Description Codes and Housing Parts

    Installation Port MIL-C-Series # Ref Total Pins/Wires PAVE Description Codes, Housing & Wires Wires 1 AWG # Wires 2 AWG # PART-DRAWING #
    ¾" o-ring face seal 38999 hermetic connector 13 VS12L-AL-150-13-TE22-27508P-48 13 22     1666
    7/16" straight thread 26482 2 SO7L-SS-150-2-TZ20-3112P-48 2 20     4005
    13.61 mm face seal   2 VS7-ZA-80-2-TZ26-BUTTON SWITCH-13.8 2 26     4155
    13.61 mm face seal submersible 2 VS7-ZA-80-2-TZ26-BUTTON SWITCH-13.8 2 24     4094
    13.61 mm   2 VS7-ZA-80-2-TZ24-Button Switch-12 2 24     3206
    29mm piston o-ring Hummer transmission seal 2 SP23Y-E-150-2-TE16-COIL5-DIN72585 2 16   16 2416
    1-⅝" o-ring face seal 5015 hermetic 2 VS22-SS-150-2-TEE4-3102P-12 2 4     3690
    ½" NPT 26482 hermetic connector 3 PT8-SS-150-3-20-16SC-3112S 3 20     1211
    1" o-ring face seal 5015 hermetic connector 3 VS15L-SS-150-3-TEE12-3102P-48 3 12     1409
    1⅜" o-ring face seal glove box wall receptacle 3 VS22-E-150-3-15A power cord receptacle 3 16     0267
    1⅝" face seal 5015 hermetic 4 VS22-SS-150-4-TEE12-3102P-6 4 12     3562
    ¾" SAE, 5k psi USB type B 4 VSO12L-SS-150-1-miniBF-USB cable-24 USB 4 USB     3645
    ½" o-ring face seal Fischer DG Series 4 VS8SX-SS-150-4-TZ24-6- QD 4 24     3807
    ½" o-ring face seal Fischer DG Series 4 VS8SX-SS-150-4-26-SC-QD 4 26     2873
    Custom flange mount Hirose hermetic 6 FL1741-SS-150-3TP-TE26-RM12BRD-15 6 26     1745
    NW25 flange 26482 hermetic connector 6 NW25-SS-80-6-20-3112E10-6P-P 6 20     1695
    ¼" NPT 26482 hermetic connector 6 PT4S-SS-150-6-20-3112P(SOC) 6 20     0949
    ½" SAE custom submersible connector 6 SO8M-SS-150-6-24-QD-SC 6 24     1922
    ¾" o-ring face seal 38999 hermetic connector 6 VS12-SS-200-6-TE22-27508P-24 6 22     4213
    ¾" o-ring face seal 38999 hermetic connector 6 VS12-AL-150-6-TE22-27508P-8 6 22     2168
    1" o-ring face seal 38999/4 hermetic connector 7 VS15L-SS-150-7-20-SC-40FB99PN 7 20     1537
    NW50 flange 26482 hermetic connector 8 NW50-SS-150-4/1/3-TE12/14/16-72-771L18S 5 12 3 16 3543
    NW40 Flange custom Johnson & Johnson Advanced Sterilization 8 PLUG/CABLE ASY & SEALED RCPT ASY 8 24     1862
    ½" NPT 38999/3 hermetic connector 8 PT8-SS-150-8-TE26-99920P-36 8 26     3168
    1¼" o-ring face seal 26482 hermetic connector 8 VS18-SS-150-8-PC16-3112P-24 8 16     3263
    1¼" o-ring face seal 26482 hermetic connector 8 VS18-SS-150-8-TEE16-3112P-24 8 16     2666
    1⅝" o-ring face seal 5015 hermetic connector 8 VS22-SS-200-8-TEE12-3102P-24 8 12     1335
    1⅝" o-ring face seal 38999/3 hermetic connector 8 VS22-SS-200-8-TEE8-99920P-300 & 265FJ8S-8-TEE8-120 8 8     2203
    ¾" o-ring face seal custom submersible 9 VS12L-AL-150-3/6-18/26-RCPT-20 3 18 6 26 3575
    1" NPT BIW connector 10 PT16-SS-150-10-EE16-126-BIW12# 10 16     2934
    1⅙" SAE 26482 hermetic connector 10 SO16-SS-80-10-TE20-3112S-360(NP) 10 20     2555
    1" o-ring face seal 26482 hermetic connector 10 VS15L-SS-80-10-TE20-3112P-36 10 20     1585
    2¾" Conflat flange 38999/2 hermetic connector 11 CF275-SS-150-11-TE12-18-27508P(V) 11 12     2432
    NW25 flange 38999/2 hermetic connector 13 NW25-SS-150-13-22 13 22     3283
    1" piston 0-ring AMP plastic connector 13 SP16E-N-150-13-PC22-MOLEX-1 13 22     2865
    1" o-ring face seal 38999/4 hermetic connector 13 VS15L-SS-150-13-40FB35PC-SC 13 22     1542
    1⅝" SAE 5015 hermetic connector 14 SO22-PS-105-14-PC16-3102S-54 NP 14 16     548
    ⅝" o-ring face seal 38999/1 submersible 16 VS10-ss-150- 15 24 1 coax 1456
    38.3mm o-ring face seal 38999/3 hermetic connector 16 D38999/23Y*-E-150-6/10-RG179/TZ24-P247PS1 16 20     2635
    1⅝" o-ring fae seal 38999/4 hermetic connector 16 VS22-SS-150-16-RG316-240-40FG1 16 rg316     3199
    1⅝" o-ring fae seal 38999/4 hermetic connector 16 VS26-SS-150-16C-RG179-240-40FG   rg179     2887
    66mm piston o-ring 38999 Series 3 16 SPF43-AL-150-16-TEE16-99920P-12 16       4000
    1¼" piston o-ring custom hermetic connector 17 SP20-E-150-16/1-COAX/TE24-#22P-18 16   1 coax 2948
    1¼" o-ring face seal 26482 hermetic connector 18 VS18-SS-150-18-TE20-3112P-120NP 18 20     1672
    1¼" o-ring face seal 26482 hermetic connector 19 VS18-SS-150-19-TE20-3112S-120NP 19 20     1607
    NW50 flange 26482 hermetic connector 21 NW50-SS-150-15/6-TE20/TE16-72-771L22S 15 20 6 16 3542
    NW50 flange 26482 hermetic connector 21 NW50-SS-150-21-TEE16-72-771L22S16 21 16     3544
    ¾" SAE 38999/3 hermetic connector 22 SO12L-22-TE26-20KC35SN-40 22 22     1393
    ¾" SAE 38999/4 hermetic connector 22 SO12L-316SS-22-TE26-20KC35SN-40 22 26     1393
    1" o-ring face seal 38999/4 hermetic connector 22 VS15L-SS-150-22-TE22-180-40FC35PN 22 22     1539
    1" o-ring face seal 38999/4 hermetic connector 22 VS15L-SS-150-22-TE22-180-40FC35SN 22 22     1541
    1¼" piston o-ring Custom AMP solder cup 26 SPF20L-AL-150-26-20-PC01-SC 26 20     2608
    1¼" o-ring face seal 26842 hermetic connector 26 VS18-SS-150-26-TEE20-3112P-36NP 26 20     1876
    Epoxy bonded 26483 hermetic connector 27 PCB 27 PINS NICOMATIC 27 30     2506
    ½" o-ring face sel nano 32 C64-AL-150-32-32-C64-1 nano 32 32     3831
    1" NPT 26484 hermetic connector 32 PT16-SS-200-10TSP-TE20-3471P-96 32 20     1995
    25.1mm piston o-ring custom submersible connector 37 PLUG-E-150-18/1-COAX/TE16-#22P 37 22     3298
    1⅞" o-ring face seal 26482 hermetic connector 40 VS26-SS-200-41-20TPS-3112P-300 & MS3475L2>0-20TPS-120 40 20     2206
    1½" NPT 26482 hermetic connector 41 PT24-PS-150-41-TE20-3112P-72 41 20     1751
    1⅝" o-ring face seal 26482 hermetic connector 41 VS22-SS-150-41-20-3112S-48 41 20     1769
    1½" NPT 26482 hermetic connector 55 PT24-PS-150-55-TE24-3112P-60 55 24     3114
    1¼" o-ring face seal 26482 hermetic connector 55 VS18-SS-150-55-TE22-180-40FE35 55 22     2882
    1⅝" o-ring face seal 26482 hermetic connector 55 VS22-SS-150-55-TEE20-3112P-24 55 20     2201
    1⅝" o-ring face seal 38999/4 hermetic connector 66 VS22-SS-150-66-TE22-180-40FF35 66 22     2886
    1⅝" o-ring face seal 38999/2 hermetic connector 79 VS22-SS-150-79-TE22-27508<10 79 22     1953

    Online drawing files require the use of Adobe Acrobat Reader version 5.0 or later version software to open to view, print or to download from the Acrobat save button. Acrobat Reader can be downloaded free of charge from the Adobe Web site at www.adobe.com.

    Upon your email request, a 3D CAD file of most of our drawing can be emailed to the customer for their design use. These 3D models can be supplied in either SolidWorks, STEP or IGS file formats. Please specify your file format preference if any.

 
 

  • PAVE-Mate® II

    Most PAVE hermetic seals are bi-directional seals for vacuum or pressure.

    PAVE-Mate© II has a single disconnect on one side and either insulated wire leads or terminals on the other side. Any connector series or type can be ordered either as a PAVE-Mate II style, including both high performance military or economical industrial metal, or plastic shell multi-pin connectors.

    For Contact insert pin out lettering or number identifications, please click on the appropriate link below:

    For PAVE-Mate Type 3112 bayonet disconnects based on MIL-C-26482 pin arrangements (PAVE catalog page 14), click here.

    For PAVE-MATE Type 3102 threaded coupling disconnects based on MIL-C5015 pin arrangements (PAVE catalog page 15), click here.

    For PAVE-MATE Type 27466, 27508, 99920, 99940 bayonet, threaded or push-pull disconnects based on MIL-C-38999 Series 1, 2, 3, or 4 (PAVE Catalog page 16), click here.

    Online drawing files require the use of Adobe Acrobat Reader version 5.0 or later version software to open to view, print or to download from the Acrobat save button. Acrobat Reader can be downloaded free of charge from the Adobe Web site at www.adobe.com.

    Upon your email request, a 3D CAD file of most of our drawing can be emailed to the customer for their design use. These 3D models can be supplied in either SolidWorks, STEP or IGS file formats. Please specify your file format preference if any.

 
 

  • PAVE-Mate® II

  • PAVE-Mate® II

  • PAVE-Mate® II

  • PAVE-Mate® II 3575

  • PAVE-Mate® II 2416

  • PAVE-Mate® II 2856

  • PAVE-Mate® II 3544

  • USB 3529
 

2751 Thunderhawk Court ♦ Dayton, OH 45414 ♦ United States ♦ +1 (937) 890-1100 x6 ♦ +1 (937) 890-5165 (fax)

PAVE Technology Co.® is located 8 miles south of the Dayton Intl. Airport (DAY) and the nearby US Air Force Museum.