2751 Thunderhawk Court
Dayton, OH 45414 · United States
+1 (937) 890-1100 x6 phone · +1 (937) 890-5165 fax
+1 (937) 890-1100 x6 phone · +1 (937) 890-5165 fax
ALL PAVE PRODUCTS ARE NORMALLY BI-DIRECTIONAL SEALS IN USE FOR VACUUMS OR PRESSURES UP TO 20 BAR (300 PSI). FOR HIGHER PRESSURES, PLEASE CONSULT WITH OUR SALES ENGINEERS.
| TEL: +1.937.890.1100 ext. 0 | FAX: +1.937.890.5165 | E-mail: tek(at)PAVEtechnologyCo.com |
|
Either purchase orders (PO) or credit card orders (MC/VISA) are accepted. Must be confirmed via fax, e-mail or can be mailed to PAVE Technology, 2751 Thunderhawk Ct., Dayton, OH 45414-3451 USA. New accounts that request an open credit PO must supply 3 trade & one bank reference. Please use the drawing # below, if it is available, to order product. The -E- in the PAVE-Mate I description refers to the hex area being molded epoxy that includes the o-ring groove, while the threads and jam nut are still metal 300 series stainless steel and the connector shells are nickel-plated aluminum. There is no difference in performance between the -SS- or -E- versions as both versions have metal threads and jam nut, only a slightly higher price for the -SS- VS housing, where available. Slightly more care should be followed per the installation instructions for the -E- versions, so parts are not over tightened, which is unnecessary and could cause damage. |
||
For Contact insert pin out lettering or number identifications, please click on the appropriate link below: For PAVE-Mate Type 3112 bayonet disconnects based on MIL-C-26482 pin arrangements (PAVE catalog page 14), click here. For PAVE-MATE Type 3102 threaded coupling disconnects based on MIL-C5015 pin arrangements (PAVE catalog page 15), click here. For PAVE-MATE Type 27466, 27508, 99920, 99940 bayonet, threaded or push-pull disconnects based on MIL-C-38999 Series 1, 2, 3, or 4 (PAVE Catalog page 16), click here. | ||
Click here to view PAVE-Seal
non-threaded piston o-ring installation 510K GIF animation
| STOCK # & Description. See drawing for details. | Part/Drawing # | PAVE Description Code. See page bottom details. | Quantity | US$ each | Conductors |
| STK #01, 12 #18TEFLON WIRES, 1" DIAMETER THRU-PORT | 2189 | SP16-E-150-12-TEE18-24-24 | C | $60.00 | 12 |
| STK #02, 9 #22 TEFLON WIRES, ½" NPT THREADS | 1588 | PT8-SS-200-9-TZ22-24-24 | A | $115.00 | 9 |
| STK #02A, 75 AMP PAVE-SEAL, ½" NPT | 1573 | PT8-SS-150-.25CU-3-3 | L | $110.00 | 1 |
| STK #02B, 150 AMP PAVE-SEAL, ¾" NPT | 1236 | PT12-SS-200HV-.38-1.6-1.6 | L | $125.00 | 1 |
| STK #02C, 2 #14 TEFLON WIRES, ½" NPT | 1708 | PT8-SS-150-2-TEE14-10-10 | $65.00 | 2 | |
| STK #03, 200 AMP PAVE-SEAL, 1" NPT | 1587 | PT16-SS-200HV-.5CU-2.4-3.0 | F | $160.00 | 1 |
| STK #04, 400 AMP PAVE-SEAL 1-7/8" PORT, JAM NUT & O-RING | 1565 | VS26-SS-1-.75CU-3.7-3.7 | A | $250.00 | 1 |
| STK #04A, 6 #28 TEFLON WIRES, 3/8" PORT | 1632 | SP6-E-150-6-TE28-50-50cm | C | $65.00 | 6 |
| STK #04B, ½"-20 THREAD, 4 #24 TEFLON WIRES, 6 INCHES | 2064 | SO8-SS-150-4-TEE24-6-6 | T | $50.00 | 4 |
| STK #05, 9 #22 TEFLON WIRES, ½" PORT | 0597 | SP8L-E-150-9-TZ22-5-16 | O | $40.00 | 9 |
| STK #05A, 4 #10 TEFLON WIRES, 3/4" PORT | 1575 | SPF12-E-150-4-TEE10-24-36 | R | $90.00 | 4 |
| STK #05B, 10 #28 TEFLON WIRES 3/4" PORT | 2104 | SPF12-E-150-10-TE28-12-10 | Y | $70.00 | 10 |
| STK #06, 12 #20 TEFLON WIRES 1" PORT | 1649 | VS15L-SS-150-12-TEE20-48-48 | $150.00 | 12 | |
| STK #08, 9 PR TYPE J THERMOCOUPLE, 1" PORT | 1664 | VS15L-SS-150-9P-JT20-48-48 | $420.00 | 18 | |
| STK #09, 9 PR TYPE K THERMOCOUPLE, 1" PORT | 1601 | VS15L-SS-150-9P-KT20-48-48 | $420.00 | 18 | |
| STK #10, 9 PR TYPE T THERMOCOUPLE, 1" PORT | 1650 | VS15L-SS-150-9P-TT20-48-48 | $420.00 | 18 | |
| STK #10A, 20 #22 TEFLON WIRES, 1" ALUMINUM PORT | 1872 | VS15-AL-150-20-TE22-48-48 | $200.00 | 20 | |
| STK #11, COAXIAL, NO PLUGS, ISOLATED SHIELD, 1" PORT | 0261 | VS15L-SS-150-1-BNC-BNC | $190.00 | 1 | |
| STK #11A, COAXIAL, NO PLUGS, ISOLATED SHIELD, ½" PORT | 1162 | VS8-SS-150-SMA-SMA COAXIAL | $220.00 | 1 | |
| STK #11B, COAXIAL, NO PLUGS, ISOLATED SHIELD, 1" PORT | 1518 | VS15L-SS-150-SHV-SHV, 5kV | $300.00 | 1 | |
| STK #12, 7 #8 + 2 PLUGS, SOLDER CONTACTS, NO CRIMP TOOL NEEDED | 1964 | VS26-SS-150-7-8-3102PS | $960.00 | 7 | |
| STK #13, 10 #20 + 2 PLUGS, PAVE-MATE 1, 1" PORT | 1656 | VS15L-E-150-10-20-3112PS | $500.00 | 10 | |
| STK #14, 13 #22 TEFLON WIRES, PAVE-MATE II + 1 PLUG, 3/4" PORT | 1666 | SP37/13-E-150-15-20-DSUB-DSUB | $300.00 | 15 | |
| STK #14A, 15#20 Std Density D-Sub connector | 3362 | VS12L-AL-150-13-TE22-27508P-48 | $310.00 | 13 | |
| STK #15, 21 #16 + 2 PLUGS, 1 5/8" PORT | 1667 | VS22-E-150-21-16-3112PS | $800.00 | 21 | |
| STK #15A, 8 #16 + 2 PLUGS, 1 ¼" PORT | 1837 | VS18-E-150-8-16-3112PS | $650.00 | 8 | |
| STK #16A, 4#20 & 21#24 D-SUB PAVE-MATE II, RETANGULAR CONNECTOR | 2299 | DSUB25-AL-150-4/21-E20/24-DSU | $350.00 | 25 | |
| STK #16B, 26 #20 CONTACTS + 2 PLUGS, ¼" PORT | 1637-1 | VS18-E-150-26-20-3112PSV | $660.00 | 26 | |
| STK #17, 12 #12 + 2 PLUGS, 1 7/8"PORT, SOLDER CONTACTS, NO CRIMP TOOL NEEDED | 1530-1 | VS26-SS-150-12-12-3102PS(AU) | $990.00 | 12 | |
| STK #17A, 37 #16 + 2 PLUGS, 1 5/8" PORT, SOLDER CONTACTS, NO CRIMP TOOL NEEDED | 1583 | VS26-E-150-37-16-3102PS | $800.00 | 37 | |
| STK #17B, 37 #22 + 2 PLUGS, 1 ¼" PORT | 1525 | VS18-SS-150-37-22-99920PS(V) | $790.00 | 37 | |
| STK #18, 48 #16 + 2 PLUGS, 2 ½" PORT, SOLDER CONTACTS, NO CRIM P TOOL NEEDED | 1669 | VS32-E-150-48-16-3102PS | $910.00 | 48 | |
| STK #19, 55 #22 + 2 PLUGS, 1 5/8" PORT | 1670 | VS22-E-150-55-20-3112PS | $960.00 | 55 | |
| STK #20, 61 #20 + 2 PLUGS, 1 7/8 " PORT | 1671 | VS26-E-150-61-20-3112PS | $995.00 | 61 | |
| STK #20A, 79 #22 + 2 PLUGS, 1 5/8" PORT | 1491 | VS22-304SS-150-79-22-999/20PS | $1,200.00 | 79 | |
| STK #21, 128 #22 + PLUGS, 2 ½" PORT | 0642 | VS32-SS-150-128-22-99920PS | $1,900.00 | 128 | |
| STK #22, FIBER OPTIC ST TYPE PAVE-MATE I, ½" PORT | 1271 | VS8-SS-150-1-62/125u-ST-ST | $500.00 | 1 | |
| STK #23A, MIL-C-26482 #16 & #20 CONTACTS CRIMP TOOL | 615708-61570 9 | CRIMP TOOL FOR #20 AND #16 CON | $485.00 | ||
| STK #23B, MIL-C-26482, SERIES II INSERTION TOOL #20 AWG | ATML08205B | TOOL INSERTION #20 | $160.00 | ||
| STK #23C, MIL-C-26482, SERIES II REMOVAL TOOL #20 AWG | ATML08206B | TOOL REMOVAL #20 | $160.00 | ||
| STK #23D, MIL-C-26482, SERIES II #16 INSERTION TOOL | ATML08207B | TOOL INSERTION #16 | $160.00 | ||
| STK #23E, MIL-C-26482, SERIES II #16 REMOVAL TOOL | ATML08208B | TOOL REMOVAL #16 | $160.00 | ||
| Call Factory for MIL-C-38999 & other crimp tools | |||||
| STK #24, Solid plug seal for VS22 port, 1 5/8" port | STK #24 | 2030, VS22-E-150-PLUG | 1 | $100.00 | |
| STK #25A, ½" port, 2 #18 PVC wires, 10 x 4", double o-ring seal | STK #25A | 1693-1,SP8L-E-150-2-PC18-10-4 | 193 | $6.00 | 2 |
| STK #26, ½" ID port, 2 #18 Teflon/Tefzel wires, 10 x 4 inches reverse from print | STK #26 | 2390-1R, SP8L-E-150-2-TZZ18-10- | 1,244 | $8.00 | 2 |
| STK #26A, ½" ID port, 2 #16 Teflon/Tefzel wires, 6 x 4 inches, double o-ring seal | STK #26A | 2918R, SP8L-E-150-2-TZZ16-6-4 | 365 | $10.00 | 2 |
| STK #26B, 2 #18 TEFZEL WIRES, ½" PORT, REVERSE FROM DWG | STK #26B | 2752R, SP8L-E-150-2-TZZ18-20-4 | 73 | $8.00 | 2 |
| STK #27, 2 #18 Teflon wires, 4 x 12 inches <½" ID port | STK #27 | 1673, SP7-P-150-2-TE18-4-12 | 2 | $25.00 | 2 |
| STK #27A, ½" ID port, 2 #20 shielded Teflon wires | STK #27A | 0760, SP8.75-E-150-2-TES20-1-32CT | 37 | $25.00 | 2 |
| STK #29, ½" ID port, 1 20kvdc cable and 1 single fiber cable, 8k psi rated | STK #29 | 1319, SP8/128-E-200-1/1-HV18/F | 1 | $550.00 | 2 |
| STK #30, 4 #10 TEFLON WIRES, ¾" PORT | STK #30 | 1575, SPF12-E-150-4-TZZ10-24- | 26 | $90.00 | |
| STK #32A, ½" ID PORT, 2 #14 AND 2 #20 TEFLON WIRES | STK #32A | 3053X SPF12L-E-150-2/2-TE14/20 | 1,932 | $10.00 | 4 |
| STK #36A, 1 ½" port, 2 #10, 36 #28 PVC flat cables | STK #36A | 3187, SP24-E-150-2/1/1-PC10/20- | 500 | $30.00 | 38 |
| STK #37A, M24 thread, 6 #22 Teflon wires, 625 x 150mm lengths, Viton o-ring | STK #37A | 1984, M24-V-80-6-TE22-625-120M | 5 | $45.00 | 6 |
| STK #37B, 12 #22 SOLDER CUPS, similar to drawing 1962 | STK #37B | 1962X, SPF12-E-200-12-22-SC-S | 105 | $150.00 | 12 |
| STK #39, M24 thread, 8 #20 PVC wires, 4 inch lengths, Viton o-ring | STK #39 | 1204X, M24-V-105-8-HAR20-4/5-2 | 3 | 30.00 | |
| STK #46A, M24 thread, 12 #20 PVC wires 6 x4 lengths, Viton o-ring | STK #46A | 1512-S, M24-V-105-12-HAR20-6-4 | 7 | 22.75 | 12 |
| STK #46B, M24 thread, 12 #20 PVC wires | STK #46B | 0840, M24-AL-150-12-HAR20-3-4 | 25 | $59.00 | |
| STK #48, MHV JAM NUT WITH #18 TEFLON WIRE | STK #48 | 2628, VSBNC-SS-200-1-CRTFE18-B | 7 | $70.00 | 7 |
| STK #66, 1 5/8" ID port, 6 pairs #20 Type J Teflon TC wire, 1 pair Type K & 20 #20 TEFLON WIRES | STK #66 | #2275-6J, VS22-SS-150/6P/1P/20 | 1 | $300.00 | 28 |
| STK #79, 1 pair type J #24 themocouple wire 1/16"NPT | STK #79 | 2409, PT1-SS-150-1P-JT24-50-50 | 3 | $250.00 | |
| STK #80, 22 wires #24 PVC | STK #80 | 0930, SPF12-E-150-18/4-PC24/TFCP015-48-12 | 1 | $100.00 | |
| STK #81, 1/2" NPT 8 PR TYPE T THERMOCOUPLE | STK #81 | 3285 R, PT8-SS-150-8P-TT24-40-120 | 4 | $180.00 | |
| STK #83 Flat cable 3M 3709/20, 3709/16 | 20 or 16 #28 PVC gray flat cables surplus price discounted stock. | More details | |||
| 615708 | CRIMP TOOL | 5 | $0.00 | ||
| M81969/14-01 | INSERTION TOOL FOR 38999 | 0 | $10.00 | ||
| 615722 | INSERTION TOOL FOR 38999 SERIES | 5 | $130.00 | ||
| M22520/2-09 | POSITIONER FOR #22D PIN | 4 | $80.00 | ||
| M22520/1-04 | POSITIONER FOR CRIMP TOOL | 0 | $200.00 | ||
| M22520/2/09 | POSITIONER FOR CRIMP TOOL M225 | 0 | $130.00 | ||
| 615723 | POSITIONER TOOL FOR M22520/2-0 | 3 | $80.00 | ||
| 615717 | TOOL CRIMP M22520/2-01 | 3 | $485.00 | ||
| 615709 | TURRET FOR 615708 | 5 | $0.00 | ||
PRODUCTS LISTED ABOVE WILL NORMALLY SHIP WITHIN 24 HOURS OF RECEIPT OF VALID CREDIT
APPROVED PURCHASE ORDER, PREPAID, OR CREDIT CARD (VISA/MASTERCARD)
DOMESTIC TERMS: 1/2% 10 NET 30 SUBJECT TO CREDIT APPROVAL. F.O.B. DAYTON, OHIO USA via UPS, DHL or customer's preferred carrier.
**SUBJECT TO PRIOR SALE. CHECK CURRENT AVAILABILITY WITH FACTORY.
ORDERING OR QUOTE REQUEST CODE. REFER TO CATALOG PAGES.
