Seal designs for all temperature ranges between -200°C to 200°C depending upon the design and the o-ring compound selected. selected.
Click on below hermetic seal photos for design drawings
PAVE Seal® Wire Harness
Hermetic electrical feedthrough wire seals for Pressure And Vacuum Electronics from 1 to +500 wires, #4 AWG to #30 AWG, any type insulation including PTFE, ETFE, PVC and others for low or high pressures or vacuums, gas-tight, moisture-proof, sealed including through the conductor or insulation. See also limited selection of in-stock hermetic seals listed on our Pricelist
Piston O-Ring Installation
PAVE-Seal ® Wire harness piston o-ring installation animation shows the fast, simple and reliable hermetic seal installation into the bulkhead or barrier using standard internal or external retaining rings. No leakage through the feedthru cable insulation or conductors, even if stranded and/or shielded wires! Custom hermetic seal designs can be readily ordered. PAVE designs routinely replace glass to metal hermetic seals.
PAVE-Mate® I hermetically sealed connectors have dual sided electrical disconnecting plugs on BOTH SIDES as double-sided or double-ended connectors with opposite gender contacts from each side from 2 - 128 contacts, #4 AWG - #22 AWG, USB, RJ45 Cat 5e Cat 6 Ethernet and firewire versions also with IP68 option. See also limited selection of in-stock hermetic seals listed on our Pricelist
PAVE-Mate® II electrical hermetic circular connectors with a single side disconnect and either pre-wired and sealed insulated wire leads or solder cups on the other side. Signal or power currents passthrough. See also limited selection of in-stock hermetic seals listed on our Pricelist
Hermetic DB Connectors
D-Sub, Rectangular & Header Hermetic Connectors – Standard density #20 AWG contacts, high density #22 AWG, micro d #25 AWG & nano d-subminiature DB hermetic connectors, hermetic header connectors and other rectangular style connectors. Single or dual sided connectors from 9 to over 200 pins. Also available are coaxial and low cost thermocouple contact versions for pressure or vacuum, lightweight aluminum or plastic shells or laser weld aluminum flanges. See also limited selection of in-stock hermetic seals listed on our Pricelist
Hermetically sealed coaxial or shielded cables of any type or PAVE-Mate® connector types with floating isolated shields for BNC, SHV, SMA, TRIAX/TWINAX, F, SMB, SMC Microdot, SMK, MDR & others. Also offer grounded housing shields and multi-pin coaxial PAVE-Mate® connectors, single or dual sided connections. Hermetic seal connector versions include 2.92mm and 1.0mm Ka-band high frequency seals for use up to 40 and 100 GHz. See also limited selection of in-stock hermetic seals on our Pricelist
Hermetic thermocouple feedthru seals for vacuum and pressure of any type of wire pairs or multi-pin thermocouple connectors.. All types available including K, T, J, E, N, RxSx with any insulation or wire length, FEP insulation is the most common. Wire conductor remains continuous through the hermetic seal for highest accuracy. Welded wire junctions can also be ordered. Hermetic dsub connector version also available. See also limited selection of in-stock hermetic seals on our Pricelist
Fiber Optic Seals
PAVE-Optic® feedthrough hermetic seals can be single and/or multi-mode optical fibers of any lengths or combination. Hermetic connector types such as SMA, ST, FCPC, etc for low or high pressures or vacuums are available. See in-stock hermetic seals listed on our Pricelist
Threaded Cu Rod Hermetic
Threaded copper or brass high current electric feedthrough terminals or studs hermetically sealed for 20 amps to 1000 amps service up to high voltages for pressure or vacuum, single or multiple terminal penetration seals. See also limited selection of in-stock hermetic seals listed on our Pricelist
High-Voltage Hermetic Seals
Any type High voltage wire or cable feedthrus up from 1-30 kV, single or multiple cables, with or without high voltage cable connectors. See SHV hermetic connector seal in stock on our Pricelist
Solder Cup Pin Seals
Hermetic electrical seals #20 AWG or smaller Pins on either one or both sides for low or high pressures and vacuum hermetic header seal in small diameter seals. See also limited selection of in-stock hermetic seals listed on our Pricelist
PAVE-Flex® is an insulated solid conductors flat cables or high conductor density Kapton® flex circuits hermetically sealed feedthru in low cost, space saving hermetic epoxy molded o-ring seals or laser welded aluminum housing designs that are both helium leak tight for low and high pressures and vacuums. Certain PAVE hermetic seal feedthroughs will also meet Telcordia GR-468-Core moisture and thermal endurance qualification testing.
Explosion-proof Wire Seals
Line bushings, conductor bushings Ex d sealing with electrical wire core cable seals or fiber optic including round or flat cables. Hazardous location and hermetic or air-tight or gas-tight or liquid-tight flame path block wire conduit sealing hubs fittings versions also available. Cable entries IECEx approvals.
In-Stock or Quick Ship Hermetic Seals — Complete List
Quick ship hermetic seal connector listing, but not as quick as the PAVE hermetic feedthrough seals used in the USAF F-35 Lightning Joint Strike Fighter! For small quantities and quicker shipments, check out this limited selection listing of both wire and pin connector hermetic electrical and fiber optic feedthrough bulkhead seals that are either in stock or faster than normal shipments.
Hermetic Electrical and Fiber Optic Bulkhead Connectors And Wire Seals
Hermetic thru-bulkhead continuous stranded conductor electrical wire seals
While default leak tests of 80 psi (5.5 bar) of no air/nitrogen bubbles visible or a high vacuum helium leak test are shown on most PAVE hermetic seal drawings, significantly higher pressure tests are usually available upon request for most designs to several hundred or more psi(bar) pressures. Certain designs can be tested as high as 10,000 psi (650 bar) or more!
Regardless of the pressure differential amount whether low or high pressures, there will be NO detectable leakage of gases or fluids in any PAVE products, including those seals with stranded copper conductor wires and or shields that feed through the bulkhead using any type of wire insulation or wire lengths.
PAVE hermetic seals are any type of insulated, stranded or solid plated copper conductors in any combination or lengths, copper or brass connector pin contacts or glass fiber optic cables of any type, all sealed for low or high pressures or vacuums, helium gas tight, moisture tight bulkhead seals available in unlimited wide range of combinations that can be easily customized for cost effective small or large quantities. Wire connector terminations can also be included for a complete, ready to use hermetically sealed thru-bulkhead wire connector harness.
Please fax order and credit card info (NO emails with credit card info!) to +1 937 890 5165 or call +1 937 890 1100 x102 with card #, expiration date and CVD code on back of card. The shipping address must match credit card address, no exceptions.
PAVE-Seal® and PAVE-Mate® and PAVE Technology Co® are the registered trademarks of PAVE Technology Co®
About PAVE Technology Company®
2751 Thunderhawk Court ♦ Dayton, OH 45414 ♦ United States ♦ +1 (937) 890-1100 x103 ♦ +1 (937) 890-5165 (fax)
PAVE Technology Co® was founded in 1980. Its wire and connector hermetic seals are used in a very wide range of industries for low or high pressures or vacuums requiring helium gas tight seals or IP67 to IP69 seals. PAVE products feed through a sealed bulkhead either electrical or fiber optic signals without any detectable leakage of gases or fluids. This complete leak tightness performance includes ends of any insulated, shielded or stranded copper conductor wire, cable and/or pins.
"PAVE seals the quality in" for our customers by investing in employee training and advanced test and production equipment.
PAVE Technology's Quality Assurance procedures and testing are certified to ISO 9001:2008. In addition, PAVE has enhanced its quality procedures to be NQA-1 compliant. PAVE Technology is also approved by numerous major aerospace, automotive, R & D Laboratories and other industrial corporations as a key supplier meeting quality, cost, and delivery issues.
Helium leak detection with sensitivity to 2 x 10-11 cc/s (air equivalent) can be done at 1 atmosphere to 2,500 psi (170 bar) pressure differential. High pressure nitrogen bubble test or hydrostatic test fixtures from 90 psi (6 bar) to over 10k psi (700 bar) are also used to verify complete seal integrity, including cable end. Length of test may vary from 30 seconds (typical) to several hours or cycles, depending upon cable lengths, pressure, etc. 100% leak testing or statistical control is used with zero defects the goal.
CAD is used to meld electrical and mechanical engineering into custom hermetic connectors for maximum design accuracy for our customers. AutoCAD® or 3D SolidWorks or IGS or pdf file formats can be exchanged via e-mail to more quickly produce new designs.
Electrical testing using both DC and/or AC continuity and hypot testing is extensively used to assure electrical performance. Typical standards are up to 1,000 VDC with a minimum 500 megohm insulation resistance. Up to 30k VDC or 5k VAC hypot testing can be done. Where moisture or other conductive fluids may be present, the "wet" end of the PAVE-Seal housing with the wires bent over is tested immersed in a saltwater solution to assure long term performance. Computerized harness testers provide maximum reliability and cost effectiveness.
Critical high vacuum components including hermetic PAVE-Seals can both be tested and vacuum degassed in the high vacuum chamber. It has vacuum capability to 10-6 Torr (mbar) with its cryopump and bake-out to 150° C.
Where applicable, PAVE-Seals® can be subjected to thermal cycling between -80° C to +200° C or thermal shock per military or commercial specifications prior to leak and electrical testing. Long term seal and electrical integrity has been established over years of developing seal technology. This is based on past and current customer field experiences and their wide range of pressures, temperatures and seal environments.
Major customers include:
Eaton Corp Auto/Aero
Alabama Power Corp
Georgia Power Corp
Lockheed Martin Corp
Ford Motor Company
Cooper Power Systems
General Electric Corp
BOC Edwards Corp
Defense Logistics Agcy
Exxon Mobile Corp
General Dynamics Corp
General Atomic Corp
US DOE R&D Labs
Robert Bosch LLC
Standard In-Stock Hermetic Seals
+1 937 890 1100 x103 tech sales or x102 for order placement including credit cards.
Click on the below drawing numbers to display the assembly drawing. Please refer to the appropriate online catalog pages for more information or click on the available drawing/part #.
PAVE-MATE DESCRIPTION CODES CHART
In-Stock Hermetic Wire Seals
Ascending number of conductors
Order by drawing # and/or STK #
Drawing # PAVE Description Code Item Description, number/size of wires, port size/type. See drawing for details. Unit Price 4460 SP5X-E-200-2-26-SC-SC 2 #26 TIN PLATED SOLDER CUP PINS $300.00 1447 PT8-SS-150-3-TEE14-18-36 3 #14 TEFLON WIRES, ½" NPT, 18x36" lengths $100.00 1575 SPF12-E-150-4-TZZ10-24-36 4 #10 TEFLON WIRES, ¾" PORT, 24x36" lengths $100.00 2064 SO8-SS-150-4-TEE24-24-24 4 #24 TEFLON WIRES, ½"-20 thread, 24x24" lengths $60.00 4488 PTN20-PS-150-3/1-PC6/PC8-16-16 3 #6 + 1 #8 PVC WIRES, 1 ¼" NPT HEX NIPPLE, 16X16" wire lengths THW UL 83 flat cable $350.00 2411-2 PT2-SS-150-5-TE24-12-12 5 #24 TEFLON WIRES, 1/8" NPT, 12X12" lengths $100.00 1632 SP6-E-150-6-TE28-50-50cm 6 #28 TEFLON WIRES, 3/8" PORT, 50x50cm lengths $75.00 0597 SP8L-E-150-9-TZ22-70-70cm 9 #22 TEFLON WIRES, ½" PORT, 70x70cm lengths $50.00 1588 PT8-SS-200-9-TZ22-24-24 9 #22 TEFLON WIRES, ½" NPT, 24x24" lengths $200.00 2104 SPF12-E-150-10-TE28-12-10, 10 #28 TEFLON WIRES, ¾" PORT, 12X10" lengths $75.00 2189 SP16-E-150-12-TEE18-24-24 12 #18TEFLON WIRES, 1" PORT, 24x24" lengths $100.00 1962-1 SPF12-E-200-12-22-SC-SC(AU) 12 #22 GOLD PLATED COPPER SOLDER CUPS EACH SIDE $160.00 1649 VS15L-SS-150-12-TEE20-48-48 12 #20 TEFLON WIRES 1" PORT, 48x48" lengths $220.00 3837 SPF12-E-150-14-TE28-12-12 14 #28 TEFLON WIRES, ¾" PORT, 12x12" lengths $100.00 1872 VS15-AL-150-20-TE22-48-48 20 #22 TEFLON WIRES, 1" PORT, 48x48" lengths $300.00
Thermocouple Hermetic Wire Seals
Drawing # PAVE Description Code Item Description, type/number/size of contacts Unit Price 3285 PT8-SS-150-8P-TT24-120-40 8 PAIRS #24 TYPE T TEFLON THERMOCOUPLE, ½" NPT, 120X40" lengths $350.00 1664 VS15L-SS-150-9P-JT20-48-48 9 PAIRS #20 TYPE J TEFLON THERMOCOUPLE,1" PORT, 48x48" lengths $440.00 1601 VS15L-SS-150-9P-KT20-48-48 9 PAIRS #20 TYPE K TEFLON THERMOCOUPLE, 1" PORT, 48x48" lengths $440.00 1650 VS15L-SS-150-9P-TT20-48-48 9 PAIRS #20 TYPE T TEFLON THERMOCOUPLE, 1" PORT, 48x48" lengths $440.00
Hermetic Pin Connectors
Drawing # PAVE Description Code Item Description, type/number/size of contacts Unit Price 4054 VS15L-SS-150HV-1-BNC-BNC BNC, 1" PORT, Floating Isolated shield Dual Sided connector $300.00 1162 VS8-SS-150-SMA-SMA COAXIAL SMA, ½" PORT, Floating Isolated Shield Dual Sided connector $220.00 1518 VS15L-SS-150HV-1-SHV-SHV SHV, 1"PORT, Floating Isolated shield Dual Sided connector $300.00 2628 STK #48 MHV-SS-200-1-CRTFE18 MHV ORING JAM NUT SEAL WITH #18 TEFLON WIRE, single side connector $70.00 3273 VS18-SS-150-8-24-RJ45-RJ45 CAT5 CAT6 ethernet CAT5 CAT 6 RJ45, 1 ¼" PORT, ethernet dual sided connector $400.00 3321 VS15L-SS-150-6-28-IEEE1394 FIRWIRE FIREWIRE, 1" PORT, IEEE1394 dual sided connector $200.00 3529 VS15L-SS-150-1-USBAmale-USBAfe USB USB 2.0, 1" PORT, USB dual sided connector $520.00 1125 PT1-SS-200-4-.028CU-QD 4 #26 +2 PLUGS, 1/16" NPT, dual sided connector push pull coupling, vacuum to 10k psi $475.00 1964 VS26-SS-150-7-8-3102PS 7 #8 + 2 PLUGS, 1 ⅞" PORT, dual sided threaded coupling connector $950.00 1837 VS18-E-150-8-16-3112PS 8 #16 + 2 PLUGS, 1 ¼" PORT, dual sided bayonet connector $600.00 2748 SP30/13-E-150-9-20-DSUB-DSUB 9 #20 STANDARD DENSITY DSUB, dual sided connector $250.00 1656 VS15L-SS-150-10-20-3112PS 10 #20 + 2 PLUGS, 1" PORT, dual sided connector $490.00 1666 VS12L-AL-150-13-TE22-27508P-48 13 #22 TEFLON WIRES, ¾" PORT, single side connector $350.00 3362 SP37/13-E-150-15-20-DSUB-DSUB 15 #20 STANDARD DENSITY, dual sided DB connector $300.00 3938 VS26-SS-150-19-12-99920PS 19 #12 + 2 Crimp Plugs, 1 ⅞" PORT, dual sided connector $1,100.00 1667 VS22-E-150-21-16-3112PS 21 #16 + 2 PLUGS, 1 ⅝" PORT, dual sided connector $880.00 3527 SP44/13-E-150-25-TE20-DSUB25-2 25 #20 STANDARD DENSITY DSUB, single sided connector $350.00 3420 SP46/13-E-150-25-20-DSUB-DSUB 25#20 STANDARD DENSITY DSUB, dual sided connector $500.00 1637-1 VS18-E-150-26-20-3112PS (CRIMP 26 #20 CONTACTS + 2 PLUGS, 1 ¼" PORT, dual sided connector $550.00 1525 VS18-SS-150-37-22-99920PS(V) 37 #22 + 2 PLUGS, 1 ¼" PORT, dual sided connector $750.00 1669 STK #79A VS32-E-150-48-16-3102 48 #16 + 2 plugs, 2 ½" PORT, dual sided connector $990.00 2522 STK #77A SP31/10-E-150-51-25-M835 51 #25 micro dsub with PCB pins $350.00 1670 STK #79 VS22-SS-150-54-20-3112PS 54 #20 + 2 PLUGS, 1 ⅝" PORT dual sided connector $700.00 1670 VS22-SS-150-55-20-3112PS 55 #20 + 2 PLUGS, 1 ⅝" PORT, dual sided connector $950.00 1671 VS26-E-150-61-20-3112PS 61 #20 + 2 PLUGS, 1 ⅞" PORT, dual sided connector $990.00 1491 STK #79B VS22-304SS-150-78-22-99 78 #22 +2 PLUGS, 1 ⅝" PORT, dual sided connector $900.00 1491 VS22-304SS-150-79-22-999/20PS 79 #22 + 2 PLUGS, 1 ⅝" PORT, dual sided connector $1,200.00 3567NPX VS26-SS-150-128-22-99920PS 128 #22 + PLUGS, 2 ½" PORT, dual sided connector $1,900.00
Hermetic Threaded Copper Rod
Drawing # PAVE Description Code Item Description, recommended maximum amps, port type/size Unit Price 1573-1 PT8-SS-200-.25CU-3-3 75 AMP PAVE-SEAL, ½" NPT, ¼ copper threaded rod $120.00 1236 PT12-SS-200HV-.38-1.6-1.6 150 AMP PAVE-SEAL, ¾" NPT $140.00 1587 PT16-SS-200HV-.5CU-2.4-3.0 200 AMP PAVE-SEAL, 1" NPT $280.00 1565 VS26-SS-200-1-.75CU-3.7-3.7 400 AMP PAVE-SEAL 1-⅞" PORT, JAM NUT & O-RING $400.00
Hermetic Fiber Optic Seals
Drawing # Drawing # Description Code Item Description, type and port size Unit Price 1271 VS8-SS-150-1-62/125u-ST-ST 1 FIBER MULTIMODE FIBER OPTIC ST DUAL SIDE CONNECTORS, ½" PORT $500.00 4547 SP6L-E-150-12-SMFO-18-18 12 FIBERS SINGLE MODE SMF28e RIBBON OPTIC SEAL, 9,37mm PORT, 7k psi to vacuum $800.00 2567-1 STK#76 VS8N-SS-150-1-MMFO-SNA 1 multi-mode fiber optic dual sided Delphi connectors, vac to 10k psi $590.00 2843-1 STK#76B SNAP-LOCK FO PLUG PATCHCORD Multi-mode fiber optic patch cord cable 1 meter with Delphi connectors each end $295.00 1319 STK #29 SP8/128-E-200-1/1-HV18/F ½" ID port, 1 20kvdc cable and 1 single fiber cable, 8k psi rated $400.00
Additional In-Stock Hermetic Wire Seals
Ascending number of conductors
PAVE Ref # Drawing # Description Code Item Description, number/size of wires, port type/size. Seedrawing for more details Unit Price 3830 STK #38A SPF18-E-200-1-TST22-100 1 twisted shielded #22 Teflon insulated cable, 1 type J #20 pair $50.00 4006 STK #81 SPF12XL-E-200-1-2TSP24- 2 twisted shield pairs #24 Teflon sealing ¾" piston o-ring port $115.00 1693-1 STK #25A SP8L-E-150-2-PC18-10-4 2 #18 PVC wires, ½" PORT, 10 x 4", double o-ring seal $6.00 2390-1 STK #26 SP8L-E-150-2-TZZ18-10- 2 #18 Teflon/Tefzel wires, ½" PORT, 10 x 4 inches reverse from print $8.00 2752 STK #26B SP8L-E-150-2-TZZ18-20-4 2 #18 Tefzel, ½" PORT, 20x4" wire lengths $8.00 3132X STK #27 SO12-SS-200-1-.25-22-33 ¾" SAE thread sealing ¼" copper rod $100.00 0760 STK #27A SP8.75-E-150-2-TES20-1-3 2 #20 Teflon shielded wires, ½" ID port $25.00 4216X STK #28 SP16-E-200-12-TEE18-24-24 1" piston o-ring seal 12 #18 PTFE insulated wires 200C, 500+ psi $100.00 3764 STK #43A SP6L-E-200-2-ETFE24-20-8 2 #24 3/8" PORT, 10k psi $500.00 4464X STK #67 VS26-SS-150-36-22-27472 1 7/8" port Double ended inline connector 37 #22 contacts $990.00 3567 STK #67A VS26-SS-150-127-22-99 1 7/8" port double sided connector, 127 #22 contacts $1,200.00 1398 STK #69 SP5-P-150-2-TEE26-5ST-1 2 #26 Teflon wire seal, 5/16" PORT, 10k psi $60.00 3053 STK #32A SPF12L-E-150-2/2-TE14/2 2 #14 and 2 #20 TEFLON WIRES, ¾" PORT $19.00 3548 STK #32B SPF12L-E-200UL94-2/2-TE1 2 #14 and 2 #20Teflon wires, ¾" PORT Viton o-rings $19.00 3187 STK #36A SP24-E-150-2/1/1-PC10/20 2#10, 36#28 PVC flat cables, 1 ½" PORT $30.00 3464 STK #37A SP8SR-E-150-4-TE22/26-12 4 #22 Teflon wires, ½" PORT $100.00 1575 STK #78 SPF12-E-150-4-TZZ10-6-8 4 #10 Teflon wires, ¾" PORT $50.00 3935 STK #80 SPF12XL-E-200-4-TEE12-1 4 #12 Teflon wires, ¾" PORT $100.00 0769-1 STK #65 PT16/8F-SS-150-7-TEE22 7 #22 Teflon wires, 1" x ½" NPT PORT $150.00 1588 STK #33A PT8-SS-200-8-TZ22-24-24 8 #22 Teflon wires, ½" NPT $150.00 2316 STK #30 SP11L-E-150-10-TE24-27c 10 #24 Teflon wires $50.00 3536 STK #35 CONXALL-150-2/2/11/1-PC 16 #26 PVC + USB cable seal, ¾" PORT $140.00 1733 STK #39 SPF18-E-150-30-TZ22-15-1 30 #22 Teflon wires, 1.29" PORT $300.00 2030 STK #24 VS22-E-150-PLUG Solid plug seal for VS22 port, 1 ⅝" port $100.00 2442 STK #24A VS15L-SS-150-PLUG Solid plug seal for VS15L PORT $150.00 STK #82 M39012/69-0003 Smb RF coaxial M39012/69-0003 Smb RF coaxial 75 ohm right angle socket contact $15.00 STK #83 5807-50001-09 MCX plug RF coax 5807-50001-09 MCX plug RF coaxial 50 ohm OSX rt angle $8.00 2766X STK #85 SP52/25-E-150-199-25-M8 double ended 199 #25 contacts dsub connector micro d $1,900.00 2749 STK #85A SP30/13-E-150-15-22-SDUB double sided 15 #22 contacts dsub connector, high density $300.00 2749-R STK #85B SP30/13-E-150-15-22-DS double ended 15 #22 contacts dsub connector, high density, gender reversed $300.00 3378-1X STK #86 PT6-SS-150-1P-TT24-6-.2 3/8" NPT 1 pair type T #24 Teflon insulated thermocouple seal $100.00
Crimp tools for pin connectorsSee instructions at FAQ question 4
PAVE Part # PAVE Description Code Item Description based on connector MIL-SPEC series Unit Price 615708-615709 CRIMP TOOL FOR #20 AND #16 CON MIL-DTL-26482 #16 & #20 CONTACTS CRIMP TOOL $485.00 ATML08205B TOOL INSERTION #20 MIL-DTL-26482, SERIES II INSERTION TOOL #20 AWG $160.00 ATML08206B TOOL REMOVAL #20 MIL-DTL-26482, SERIES II REMOVAL TOOL #20 AWG $160.00 ATML08207B TOOL INSERTION #16 MIL-DTL-26482, SERIES II #16 INSERTION TOOL $160.00 ATML08208B TOOL REMOVAL #16 MIL-DTL-26482, SERIES II #16 REMOVAL TOOL $160.00 615717 TOOL CRIMP M22520/2-01 MIL-DTL-38999 CRIMP TOOL $500.00 615723 POSITIONER FOR #22D SOC MIL-DTL-38999 POSITIONER FOR CRIMP TOOL $80.00 M22520/2-09 POSITIONER FOR #22D PIN MIL-DTL-38999 POSITIONER FOR CRIMP TOOL $80.00 ATML0801B TOOL INSERTION, 38999 MIL-DTL-38999, INSERTION TOOL $160.00 ATML0802B TOOL REMOVAL, 38999 MIL-DTL-38999, REMOVAL TOOL $160.00
Products listed above will normally ship within 24 hours of receipt of valid credit approved purchase order, prepaid, or credit card (Visa/Mastercard)
Domestic Terms: ½% 10 net 30 subject to credit approval. F.O.B. Dayton, Ohio USA via UPS, DHL or customer's preferred carrier.
Skilled electrical assemblers, molding press operators and CNC machinists needed. Soldering experience, manual dexterity, and ability to read engineering drawings is required for assemblers epoxy potting and testing small electrical cable assemblies and connectors. Machinist should have experience in setting up jobs.
Apply in person to fill out application in office lobby. Full benefits available including 401k profit share plan. An Equal Opportunity Employer. M/F
2751 Thunderhawk Court ♦ Dayton, OH 45414 ♦ United States ♦ +1 (937) 890-1100 x103 tech support ♦ +1 (937) 890-5165 (fax)
PAVE Technology Co.® is located 8 miles south of the Dayton Intl. Airport (DAY) and the nearby US Air Force Museum.