For Contact insert pin-out lettering or number identifications, please click on the appropriate link.
For PAVE-Mate Type 3112 bayonet disconnects based on MIL-C-26482 pin arrangements
For PAVE-MATE Type 3102 threaded coupling disconnects based on MIL-C5015 pin arrangements
For PAVE-MATE Type 27466, 27508, 99920, 99940 bayonet, threaded or push-pull disconnects based on MIL-C-38999 Series 1, 2, 3, or 4
Most Pave Hermetic Seals Are Bi-directional Seals for Vacuum or Pressure
Hermetic Dual-sided Feedthrough Connectors Specifications
- Dielectric Strength: >17.4 kV/mm
- Dielectric Constant: 5.3@ 1 Mhz
- Volume Resistivity: @ 125° C1x1015 Ohm-cm
- Dissipation Factor: 0.03 @ 1 Mhz
- Hardness, Shore D: 96
- Low Vacuum Outgassing: TML: 25% ;CVC<: .01%
- High Fungus Resistance: MIL-STD–454J/4
- Specific Gravity: @ 25° C 2.3
- Compressive Strength: >948 kg/cm2
- Compressive Modules: 7.7×104 kg/cm2
- Tensile Strength: >470 kg/cm2
- Water Absorption (24 hours): 0.03%
HERMETIC EPOXY TEMPERATURE RATING (Epoxy is proprietary and not sold separately)
The PAVE-Seal® epoxy is impervious to most oils, solvents, fuels, freons, gases, etc. Epoxy samples are available upon request for customer’s evaluation for any specific chemical compatibility.
Any type or size of wire or cable may be specified including coaxial cables, thermocouple wire pairs, high voltage wires, fiber optic cable, flat cables, etc. for length.
NO DETECTABLE LEAKAGE THRU CONDUCTOR OR INSULATION.